With a range of decorative gravel and rock available across Australia, Pour On Gravel Binder offers a cost effective way of creating a decorative pathway without the maintenance issues normally associated with using loose gravel.

​

Pour On is easy to install and can quite simply be undertaken as a DIY project. Following a few simple a guidlines a beautiful pathway like this project in Sydney can be created to compliment sandstone and concrete paver steps or even a seamless all gravel surface.

​

This finish was created by raking the 10mm gravel around the new sandstone pavers at a thickness of 30mm. Ensuring the gravel was dry and the base was not damp, the resin was poured applying an initial light coat. Before the resin had cured the gravel was smoothed off with a trowel. Curing time varies but normally takes anything from 4 hours.

​

Once the area had been left to cure overnight a second application was applied. For this type of application a third coat isn't always necessay altough it is advisable to keep a small pot to hand to tend to any areas of loose stone.​